Fast ShippingServices

Randell 8260N-290-PCB 60" W Two-Section Two Door Two Door Refrigerated Raised Rail Prep Table

SKU:
8260N-290-PCB
MPN:
8260N-290-PCB
$7,896.50

Randell 8260N-290-PCB Product Description

Refrigerated Raised Rail Prep Table, two-section, 60" W, 14.67 cu. ft. capacity, side-mounted self-contained refrigeration, (2) solid hinged doors, stainless steel front, top, & sides, cold wall refrigeration pan rail, poly CTB, accommodates (8) 1/3 size pans (pans not included), separate controls, automatic adaptive defrost, aluminum interior, R290 Hydrocarbon refrigerant, 6" casters, 1/3 HP, 115v/60/1-ph, 6.0 amps, cord, NEMA 5-15P, NSF, cUL, UL, Made in USA

Cleaning Instructions

The gaskets and rail drains of the Randell 8260N-290-PCB Refrigerated Prep Table require weekly cleaning. Cleaning can be done daily as well, depending on necessity. Use a mild cleaning solution made from liquid dish soap dissolved in warm water for cleaning the prep table. As for the condenser coils, simply vacuum or brush off dirt.

Additional Info

The Randell 8260N-290-PCB Refrigerated Prep Table is made in the United States of America. It is c-UL, UL, and NSF listed.

General Info

Randell 8260N-290-PCB Refrigerated Prep Table 
Using the Randell 8260N-290-PCB Refrigerated Prep Table and its integrated poly cut board, meal prep is fast and convenient!

Two doors, measuring 24 inches each, provide access to the interior of the Randell 8260N-290-PCB Refrigerated Prep Table. Made with high-impact ABS interiors, the doorssurfaces and corners are easy to clean and provide depth and insulation that improves the gasket longevity. These gaskets are press-fitted magnetic type hence creating a positive and efficient seal. The doors open to an interior measuring 14.67 cubic feet. The exterior of the door is made from stainless steel and has flush mounted door pulls. It is equipped with a light, stainless steel rail cover. This covers the water-tight, sealed pan rail made from non-magnetic stainless steel.
Crafted with one-piece solid construction, the interior is made from non-magnetic steel. This allows it to support a work area on the exterior that is 15 inches wide. The cabinet boasts durable anodized aluminum construction for the interior floor and rear wall. A front raised pan rail, 4 inches in height, separates the prep area from the food storage. An integral recessed pan edge and standard oversized clean out port streamlines the cleaning process. 
The hinged compressor compartment of the Randell 8260N-290-PCB Refrigerated Prep Table provides easy access for cleaning. It also lets users reach the compressor for removal of dust. On top of that, it has a self-contained, single-compressor system for convenient maintenance.
With its heavy-duty, epoxy coated shelf mounted on metal supports, the Randell 8260N-290-PCB Refrigerated Prep Table helps you organize your food items. Food is kept cooled by a cold wall that conducts cold throughout the interior. On the exterior, you will find electronic controllers for monitoring and changing of the base settings. It allows for adaptive defrost and rall on/off feature that saves 60% of power for nightly shutdowns. 
The Randell 8260N-290-PCB Refrigerated Prep Table provides poly cut board with its workspace. It is 60 inches long, 33 inches deep, and 52.5 inches high. A set of 6-inch casters keep it mobile even with a weight of 459 pounds. It uses 115 volts, 1 phase, 60 hertz, and 6 amps supplied through a NEMA 5-15P plug. This allows it to run a 1/3 horsepower motor. It can hold eight 1/3 sized pans.

Delivery Details

The Randell 8260N-290-PCB Refrigerated Prep Table is a heavy equipment that requires two or more people for handling it.
Due to similar reasons, loading dock is necessary for this prep table but a lift gate can be used if one isn available.
Inspect the Randell 8260N-290-PCB Refrigerated Prep Table for damages before signing the delivery receipt.
Handle the prep table refrigerant tubing, condenser, and evaporator coils with caution as it can be prone to damage.
Do not attempt to relocate the Randell 8260N-290-PCB Refrigerated Prep Table to the final location without confirming whether it will fit through the access path.
Verify whether the electrical specifications of this prep table match that of your power source before operating it.
Keep in mind that the evaporator fan works continuously as long as the prep table is on.

Maintenance Guide

To keep it in good condition, clean the Randell 8260N-290-PCB Refrigerated Prep Table regularly. Use of sharp objects and tools such as steel wool can damage the stainless steel while corrosive chemicals like muriatic acid can do the same. For the aforementioned reasons, do not use either kind of cleaning implements. Never pressure wash this prep table to avoid damaging its electric components.

Randell 8260N-290-PCB Specs

Weight459.00 LBS
Height:44.00(H)
Width:60.00(W)
Depth:33.00(D)
Compressor HP:1/3 HP
Door Type:Solid
Exterior Finish:Stainless steel
Interior Finish:Aluminum
Nema Plug Type:Nema 5-15P
Number of Doors:2
Number of Sections:2
Refrigerant Type:R290
Refrigeration:Self-contained refrigeration
Refrigeration Location:Side-mounted
Voltage:115v
Tags:Refrigerated Counter, Pizza Prep Table
Manufacturer:Randell
UL Certified:Yes
Amps:6
Phase:1-Ph
Hertz:60
NSF Certified:Yes
Access Type:Doors
Made in USA:Yes
is free shipping:no
Sale Price:7896.50
cUL Certified:Yes
⚠️ Attention CA Residents: Prop 65 Warning