Fast ShippingServices

Beverage Air SPE27HC-B 27" W One-Section One Door Sandwich Top Refrigerated Counter

SKU:
SPE27HC-B
MPN:
SPE27HC-B
$2,290.79

Beverage Air SPE27HC-B Product Description

Sandwich Top Refrigerated Counter, one-section, 27"W, 6.9 cu. ft., (1) door, stainless steel top with opening for (8) 1/6 size pans, 10" cutting board, (2) epoxy-coated wire shelves, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans), R290 Hydrocarbon refrigerant, 1/10 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Cleaning Instructions

When cleaning your Beverage-Air SPE27HC-B Sandwich Prep Table, you may use a solution of mild soap and water for the cabinet exterior and the interior surfaces. It is recommended to use a cloth or a sponge for this. If the stainless steel has become discolored, scrub by rubbing only in the direction of the finish grain. Do not use steel wool or other abrasive cleaners as they will damage the finish of the unit.

Additional Info

The Beverage-Air SPE27HC-B Sandwich Prep Table is made in the USA. It is certified by the cULus, UL Sanitation, and the UL EPH.

General Info

Maximize your efficiency by keeping your ingredients accessible and ready for use with the Beverage-Air SPE27HC-B Sandwich Prep Table. Boost your efficiency and make the most out of your kitchen space by keeping your ingredients close and well-preserved. For this, the Beverage-Air SPE27HC-B Sandwich Prep Table lets you prepare food on its 10-inch wide cutting board. This cutting board also packs 10 inches in depth and is constructed of white, polyethylene plastic. You can easily remove it for easy cleaning as well. The prep table top rail contains the 8 (4-inch deep) pans that are made from polycarbonate plastic. This enables you to store much of the ingredients that you need right within an arm length. Easy access to your ingredients and other food product doesn end there. The Beverage-Air SPE27HC-B Sandwich Prep Table has a cabinet that contains 2 steel wire shelves ready to be used as additional storage. These shelves are epoxy-coated for guaranteed durability. The door to the cabinet is self-closing to prevent wasted cooling and energy. It also has a 120 degree stay open feature on cartridge-style hinges to better facilitate your convenience. The door when open at 90 degrees has a depth of 55 3/8 inches, and an opening of 22 5/8 inches x 21 5/8 inches. Even the door is removeable as well to give you a much easier time with servicing and cleaning. It is also field-reversible and uses snap-in gaskets. As for its handle, it painted aluminum. The Beverage-Air SPE27HC-B Sandwich Prep Table is made of stainless steel for its front, sides, top, door, and grille. For its back and bottom, it packs a galvanized steel finish. The interior liner is made of non-corrosive aluminum to deliver longer product life. The hoods are removable and the insulated lid assemblies are constructed of matching stainless steel. The refrigeration system of the Beverage-Air SPE27HC-B Sandwich Prep Table maintains a temperature range of 36 degrees Fahrenheit to 38 degrees Fahrenheit. Products in open containers are kept below 41 degrees Fahrenheit and above freezing, as assured by the enhanced airflow. This prep table uses an automatic and non-electric defrost that can save you significant time and labor without sacrificing any maintenance. In the spirit of environmental sustainability, the refrigeration system uses R290 refrigerant to comply with environmental concerns. As for the evaporator coil, it also epoxy-coated for enhanced longevity. With external dimensions of 45 3/8 inches (height) x 27 inches (width) x 31 inches (depth), this prep table has a weight of 202 pounds. To maintain its mobility for easier cleaning and repositioning, the Beverage-Air SPE27HC-B Sandwich Prep Table comes with 6-inch casters with 2 brakes. It has a capacity of 6.91 cubic feet. For its power, it runs on 1/6 HP, 1140 British Thermal Units per hour, 2 AMPS, and 115 volt/60 Hz/1 Ph. It uses a NEMA 5-15P for its plug.

Delivery Details

The Beverage-Air SPE27HC-B Sandwich Prep Table weighs 202 pounds and requires 2 or more persons to handle it. The prep table requires a lift gate should a loading dock be unavailable. Ensure that the unit can fit through the access path to the final location by verifying the access path dimensions. Install the unit on a stable and level surface that capable of supporting its weight. Verify the electrical specifications of the unit before connecting it to a power source. The pep table is not intended for outdoor installation. Please examine the unit thoroughly for any damages before signing the delivery receipt.

Maintenance Guide

For the efficient operation of your Beverage-Air SPE27HC-B Sandwich Prep Table, it is recommended to clean the condenser coil every 3 to 6 months. To do this, simply remove the rear grille for access then vacuum clean the front surface of the coil thoroughly. Alternatively, you may direct forced air through the condenser fins. Do not overload the shelves to prevent material damage.

Beverage Air SPE27HC-B Specs

Weight202.00 LBS
Height:45.38(H)
Width:27.00(W)
Depth:31.00(D)
Access Type:Doors
BTU/HR:1140
Compressor HP:1/6
Exterior Finish:Stainless steel
Exterior Finish3:Stainless Steel
Interior Finish:Aluminum
Nema Plug Type:NEMA-5-15P
No. of Shelves:2
Number of Doors:1
Number of Sections:1
Refrigerant Type:R290
Sections:1
Work Surface Finish:Cutting Board
Tags:Refrigerated Counter, Sandwich / Salad Unit
Manufacturer:Beverage Air
Alternate Image:SPE27HC-B_Camera_Horiz--Lview-Open.png
Made in USA:Yes
is free shipping:no
Sale Price:1837.27
⚠️ Attention CA Residents: Prop 65 Warning