Fast ShippingServices

Berkel 827E-PLUS 12" Dia. Electric Food Slicer


Berkel 827E-PLUS Product Description

Slicer, manual, angled gravity feed, one-speed, 12" dia. C.S. knife, permanent knife guard, built-in sharpener, 1/3 HP, 115v/60/1-ph, 3.1 amps, NEMA 5-15P, cETL, NSF

Cleaning Instructions

For details on how to disassemble the Berkel 827E-PLUS Gravity Feed Slicer, kindly refer to its Cleaning and Sanitizing Sheet. Always remember to wear cut resistant gloves when handling this equipment. To clean the slicer, start by carefully scraping all food scraps. Next, wash the product table, center plate, meat pusher and slice rod, and slice deflector in warm water. Keep them submerged in a sanitizer solution before letting them air dry. To clean the surfaces, simply wipe them using a soft cloth soaked with liquid detergent. Avoid getting any electric parts wet.

Additional Info

To ensure that the Berkel 827E-PLUS Gravity Feed Slicer complies with the health and safety standards of the industry, it holds the following certifications: NSF and cETLus listed.

General Info

The Berkel 827E-PLUS Gravity Feed Slicer is a manually-operated slicer. It has a weight of 49 pounds and dimensions of 16 inches (W) x 13 inches (H) x 20 inches (D). Meanwhile, it has a cutting capacity of up to 8 3/4 inches wide, 7 1/4 inches high, and 7 inches in diameter. It is also equipped with a nominal 12-inch diameter hollow ground, chromium-plated carbon steel knife, which offers great edge sharpness and retention. The slicer also features a precision system that provides infinite slice thickness adjustment from tissue thin up to 9/16-inch thick. It showcases a 45-degree angle feed with removable anodized aluminum pusher, which makes product feed easier and allows for more consistent slices. This also requires less mechanical pressure and reduces strain. Durable and easy to clean, all food contact areas of the Berkel 827E-PLUS Gravity Feed Slicer are made with stainless steel and sanitary anodized aluminum. In addition, it is created with parts that can be quickly disassembled without the need of tools. It is also equipped with a top-mounted, two-stone knife sharpener system, which helps the slicer to maintain a consistent and lasting sharp knife edge. Moreover, it features a permanent tapered knife ring guard, which covers the non-slicing portion of the knife even when the center plate is removed. For easy operation and maintenance, it also has a positive, moisture protected on and off switch with power light indicator. The Berkel 827E-PLUS Gravity Feed Slicer operates on 3.1 amps AC, and has electrical requirements of 115 volts, 60 hertz, and single-phase electrical supply. It is also built with a 1-speed and 1/3 horsepower knife motor that is totally enclosed, permanently lubricated, and thermally protected. It comes with an attached 6-foot, flexible, 3-wire cord and a NEMA 5-15P plug for ground receptacle.

Delivery Details

• Upon receiving your Berkel 827E-PLUS Gravity Feed Slicer, carefully inspect it for damages. If any are damages found, immediately file a claim about it with your freight carrier and have the item marked as “damaged” on their copy of the freight bill. • When moving the slicer, hold only the product table handle to prevent getting cut. • Lower risk of accidents by choosing a location with a level surface for your slicer. • Before operation, check all the components of the slicer and make sure that there are no obstructions that can hinder its movement.

Maintenance Guide

To keep the Berkel 827E-PLUS Gravity Feed Slicer in its top condition, proper care and maintenance are important. When not in use, close the slicer thickness control by turning the thickness index knob to 0. Also, observe a regular cleaning schedule. It is best to wash the slicer at least once a day or more frequently if it is being used continuously.

Berkel 827E-PLUS Specs

Weight49.00 LBS
NSF Certified:Yes
Tags:Food Slicer, Electric
is free shipping:no
Sale Price:1200
Filter Type:Slicers
⚠️ Attention CA Residents: Prop 65 Warning