To prevent injury, please use cut resistant gloves when handling the Berkel X13A-PLUS Automatic Gravity Feed Slicer. This is due to the knife included with the equipment. Kindly remove the product table, center plate, meat pusher, and slice rod and slice deflector before placing it in water. Then, move it into a sanitizing solution. Avoid bringing electric components into contact with water.
The Berkel X13A-PLUS Automatic Gravity Feed Slicer is ETL and c-ETL-us certified.
At 28 inches wide, 30 inches deep, and 26 inches high, the Berkel X13A-PLUS Automatic Gravity Feed Slicer holds a total weight of 128 pounds. It is made using NSF approved polymers, allowing for a seamless body. Its gauge plates and center plates are made using anodized aluminum. The gauge plate features a mechanical interlock done with twisted wire and aircraft cables, ensuring its durability. A kickstand is included to support the slicer, allowing for easier cleaning beneath it. Placed outside the drip zone, the controls of the Berkel X13A-PLUS Automatic Gravity Feed Slicer are made with sealed push button switches. These allow for efficient management of the equipment. The slicer requires no volt release, letting you restart it after a power interruption. It uses 120 volts-1 phase-60 hertz supplied through a 3-foot cord and prong. The knife motor of the Berkel X13A-PLUS Automatic Gravity Feed Slicer boasts a ½ horsepower with 1 speed. Not only is it totally enclosed but it also has permanently lubricated ball bearings. It is also thermally protected. The brushless table motor allows for three speeds of 20, 40, or 60 slices per minute. This triple stroke length lets you produce varying slices without a fuss. The Berkel X13A-PLUS Automatic Gravity Feed Slicer features a 13-inch knife that helps cut food into even slices. Made of hollow ground, hardened and polished stainless steel, this equipment is ensured to last. It includes a dual action design knife sharpener made with borazon stones, allowing for a sharper edge. Moreover, a permanent tapered guard cover is available on the non-slicing part of the knife to help you maintain the blade’s condition. With a cutting capacity of 10 ½ inches by 6 ¾ inches rectangle, a 7 ½ inches square, and 8 ½ inches round, the Berkel X13A-PLUS Automatic Gravity Feed Slicer lets you cut up a variety of food. Aside from this, 9index knob controls with variable pitch barrel cam let you manage the process even further to tailor it to preference. Its ultra-fine-tuning adjustments let you cut food at a thickness of only 1 5/6th inch.
• Due to the Berkel X13A-PLUS Automatic Gravity Feed Slicer’s sharp parts, it is necessary to use cut resistant gloves when handling this equipment. • Inspect the slicer for damages prior to signing the delivery receipt. • Do not install the Berkel X13A-PLUS Automatic Gravity Feed Slicer outdoors. • Please ensure to verify the electrical specification of the Berkel X13A-PLUS Automatic Gravity Feed Slicer before connecting to a power source.
The Berkel X13A-PLUS Automatic Gravity Feed Slicer needs regular cleaning to perform well. Please conduct routine cleaning and maintenance to extend its longevity. You can find detailed maintenance instructions within the manual for this slicer.
Thank you for your patience while we observe Shabbat. You may still add items to your cart or wishlist to checkout later.
Want an alert when checkout reopens?
We guarantee your data's privacy 100%