Duke TMD-46SS Thurmaduke Milk Dispenser

4 easy payments of $2,161.28 0% interest no credit check!
4 easy payments of $2,161.28 0% interest no credit check!

Product Specifications

Weight 450.00 Pound(s)
Dimensions 36.00(h) x 46.00(w) x 32.00(d)
Amps 5 Amps
Pan-Type Carrier 20.5” x 20.5”
Temperature Range -10°- 0°F(Ice cream cabinets)
Casters 5”D polyurethane casters, 2 with brakes
Cooling Area 23”(l)x 23”(w) x 26.5”(h)
Voltage 120V
Power ¼ Hp
Exterior Finish stainless steel


The TMD-46SS Thurmaduke Milk Dispenser from Duke comes with a 16-gauge, 300 series stainless steel top with outside edges flanged down 2” at 90° on all four sides and flush with body on ends. The vinyl foam tape is used between top and body for sound-deadening. It comes with an opening at the top and is provided with a hinged folding lid. The free standing body is formed of heavy-gauge steel with a specified powder coat paint color or 300 series stainless steel. The sides and ends are fully enclosed, while the stainless steel adapter collar is furnished.

A temperature of 38°F in milk cabinets and -10°F to 1°F in ice cream cabinets (adjustable) is maintained by means of four-wall copper refrigerant coils and an accessible thermostatic expansion valve for use with R-134A refrigerant. The welded stainless steel interior liner is water-tight and is separated from top by full perimeter plastic breaker strips. The bottom is fitted with 1” IPS thermoplastic drain with stopper. It is fully insulated with poured-in-place polyurethane insulation (2.5” on sides, 1.37” on bottom) and is mounted on NSF approved 5” diameter polyurethane casters, all swivel, two with locks.
Related Downloads
4 easy payments of $2,161.28 0% interest no credit check!

Product Highlights

  • Capacity of 252 half-pint peak top milk cartons
  • Stainless steel body and fully enclosed sides and ends
  • NSF approved, 5” diameter polyurethane casters, 2 with brakes
  • Edges flanged down 2” on 90° on all four sides and 1” IPS thermoplastic drain, with stopper
  • Insulated stainless steel hinged lid and removable, stainless steel dispensers
  • System of springs and ball bearing guides and four-wall copper refrigerant coils
  • -10°F to 0°F in ice cream cabinets and welded, stainless steel liner
  • Foam-in-place polyurethane insulation – 2.5” on sides, 1.37” on bottom
Related Downloads